German Engineering

• DDS - Directional Depending Stiffness

  Directional depending stiffness is the ability of a frame or component to optimally respond with high stiffness to the forces acting in the load direction while ensuring high comfort. In other words, it is the synergy between intended stiffness and desired comfort. In the case of frames, this is achieved by designing transverse-oval tube shapes, the targeted selection of materials (e.g. carbon fibers) and their application (e.g. special layups for carbon fiber reinforced plastics).

  
• SAS - Sectional Aerodynamic Shaping

  The rider and his/her seating position essentially determine the aerodynamics of the total system. The geometry of the bike (handlebars, wheels, frame) is another factor. For the frame, the frontal areas opposing the airflow need to be minimized to improve the drag coefficient of the total system. It has been proven that a drop with 0.02 has the optimal drag coefficient. Therefore, Storck frames with SAS have a natural drop shape in ground parallel aerodynamics: less loss of force due to more aerodynamics.

  
• AAS - Advanced Sectional Aerodynamic Shaping

  The ideal drop shape makes it possible to achieve an engineered optimum of the drag coefficient just by using SAS technology. In AAS, the basic idea of “Ground Parallel Aerodynamics” and the resultant optimization of the cwA value are complemented by the introduction of a trailing edge that dissolves vortices. Better aerodynamics combined with enhanced material efficiency due to purposeful further development of the tube construction.

  
• HFX - Hysteresis Flex

  Damping without dampers. When an effect lags behind the variable force that causes it, this is called hysteresis. Storck handlebars, seat posts and frames exhibit this special characteristic. Its secret lies in the processing of the CFRP materials. Specifically, we are talking about layups in this context. Shocks can be optimally absorbed this way. ‘Bouncing’ is minimized and the original state restored faster. Ultimately, this means more control for the rider, less loss of force and higher comfort.

  
• ISM - Integrated Seatpost Mount

  The integrated seat clamp results in the seat post offering longer spring deflection due to the elimination of the seat mast on the frame, which automatically increases the flex of the seat post.  This effect is supported by HFX in our MLP seat posts. The longer the extension of the seat post, the greater the effects of these properties. In addition, ISM impresses with an uncluttered look and weight savings (shorter seat tube, elimination of the seat clamp).

  
• ILS - Infinity Loop Seat Stay

  Seat stays as damping elements. A curved stay with a very large radius offers enormous damping without sacrificing stiffness or adding weight, which must be accepted for spring elements. The preformed seat stay absorbs shocks and bumps. Ideal in combination with HFX. The results are noticeable gains in comfort and higher riding safety resulting from increased traction.

  
• FSI - Flat Section Impact

  The second area moment determines the behavior of a component under bending and torsional loads depending on the loaded cross-sections. The partial reduction of the axial second area moment of the Fascenario.3 seat post improves hysteresis flex behavior combined with stable torsion stiffness and a positive aerodynamic effect: AAS. This results in enhanced comfort and aerodynamics in the area of the rear triangle / seat post.

  
• PPT - Proportional Tubing

  Larger frames, due to the rider’s weight and higher leverage, are naturally exposed to higher load changes as well. Proportional Tubing takes these loads into account. The conification, the wall thickness of the tubes and the diameter are adapted to these loads. This results in frames which, irrespective of the frame height, deliver consistently good stiffness and comfort values.

  
• TFA - Torque Free Axle

  Disc brakes massively stress the frame and the axles due to the absorption of the torsion and shear forces that are generated while braking. Torsion-resistant shafts, called through-axles, are the best way to counter these forces. Storck through-axles are not only used in mountain bikes but have long made their way into cross and road bikes with disc brakes as well. They provide stability, precise fit and stiffness.

  
• ODM - Optional Direct Mount

  The selection of shifting variants for off-road assemblies is very large. Opting for a triple, double or single chain ring is a completely individual choice. Those selecting a single chain ring can dismantle the front derailleur mount and give the frame an uncluttered look that is undisturbed by a superfluous assembly platform. The frame can just as quickly be prepared again for a multiple chain ring: a minor detail with a major impact.

  
• T25 - On The Fly Maintenance

  Never again without tools out in the middle of nowhere. A tool for (nearly) all bike purposes that doesn’t require a tool bag. The T25 standard torque wrench unobtrusively and securely fits in the through-axle drill hole, for example, always close at hand. As a result, monolink seat posts, stems, through-axles, head set clamps, disc brake mounts, ODM and bottle holders on a Storck can all be installed with the universal wrench.

  
• NTR - Nano Carbon Technology Resin

  If the surface properties of the particles instead of the volume properties determine the quality of the material this is referred to as size-induced functionality. The utilization of nanoparticles in the resin structures of the carbon fibers improves the breaking and splintering behavior and increases the flexibility of the component as well. Enhanced comfort combined with higher component safety.

   

  
• OFD - Optimized Aero Fork Design

  The optimum distance between components prevents aerodynamically unfavorable vortices of the airflow. The open and wide design of the Fascenario.3 fork takes this into account and thus avoids the resistance and its braking effect that might occur due to air stream vortices between the fork and the wheel in a design where the components are too close together. This approach is supported by the aerodynamically favorable seat of the fork crown on the head tube.